Skip to content

EstimationEstimating and takeoff software for HVAC, plumbing, and electrical contractors

A plan set in. A bid you can stand behind.

Estimation reads every sheet as lines and stands the job up in 3D, then prices it with your suppliers, your crew, and the same math every time. It learns from every job you close. You approve it before it goes out.

Your first bid is free. Then Starter is $199 a month, or Core $499.

The plan viewer's 3D view of a sample office suite: walls, a rooftop unit feeding a supply trunk down the corridor, branches to the ceiling diffusers, VAV boxes, return duct, and exhaust fans over the restrooms.
A made-up sample office suite, drawn by BrightDoor. Plans printed from CAD stand up in 3D; scans stay in 2D.

Plan viewer

Every sheet sharp in 2D. Standing up in 3D.

Estimation reads each sheet’s own lines and CAD layers. Find a duct, see its length, and turn the job around before you price it.

Find: fans, new work, rtu
OFFICE 101CEILING HEIGHT = 9'-0"OFFICE 102CEILING HEIGHT = 9'-0"CONFERENCECEILING HEIGHT = 9'-6"MENWOMENSTORAGECORRIDOROPEN OFFICECEILING HEIGHT = 10'-0"BREAK ROOMCEILING HEIGHT = 9'-0"IT16x128"Ø8"Ø10"Ø14x10 RASD-1SD-1RG-1VAV-1VAV-2EF-1EF-2(N) RTU-1, 7.5 TON(E) RTU-2 TO REMAINM1.1 MECHANICAL PLANNEW WORKSCALE 1/8" = 1'-0"SAMPLE SUITE, SAMPLE CITY

A sample sheet, drawn from its own lines.

Sample sheet of a made-up office. 3D works on sheets printed from CAD; scanned sheets stay in 2D.
  • Find it on the sheetType “supply duct” or “rtu”. Every match lights up.
  • Lengths at the sheet’s scaleRuns read in feet. Measure snaps to the drawing’s corners.
  • 3D from the same linesWalls, duct, grilles, fans, and units, at the ceiling heights on the sheet.
  • One click to the takeoffAdd a part as a run or a count. You still approve every line.

How a bid gets built

Five steps. You approve every one.

Review what we read, match your prices, set the crew, check the totals, and send the proposal. Watch the sample build itself.

Bid E-2041 · to Sample Builders

Sample office suite, HVAC

Bid ready

Step 4 of 5, Bid

  1. Review, done
  2. Prices, done
  3. Crew, done
  4. Bid, current
  5. Proposal, open

Bid: Review totals · $47,650 at 22%

OFFICE 101CEILING HEIGHT = 9'-0"OFFICE 102CEILING HEIGHT = 9'-0"CONFERENCECEILING HEIGHT = 9'-6"MENWOMENSTORAGECORRIDOROPEN OFFICECEILING HEIGHT = 10'-0"BREAK ROOMCEILING HEIGHT = 9'-0"IT16x128"Ø8"Ø10"Ø14x10 RASD-1SD-1RG-1VAV-1VAV-2EF-1EF-2(N) RTU-1, 7.5 TON(E) RTU-2 TO REMAINM1.1 MECHANICAL PLANNEW WORKSCALE 1/8" = 1'-0"SAMPLE SUITE, SAMPLE CITY

Needs you · 1VAV box, 8" inlet: the price is a close match. Check it before you send.

Bid total

$47,650

Profit $10,502.57Margin 22%Crew 5 days

82
How the bid adds up
  • Materials$21,127.94
  • Tax$1,817
  • Labor$4,680
  • Crane and curb$1,650
  • Test and balance$1,200
  • Permit$650
  • Truck$375
  • Disposal$250
  • Overhead$3,809.99
  • Contingency$1,587.50
  • Profit$10,502.57

Lines

13 lines + crew
Sample bid lines for the sample office suite
ItemAmount
Rooftop unit RTU-1, 7.5 tons1 EAYour price list$11,800
Supply duct, 16x1281 ftYour price list$2,430
Supply duct, 8" and 10" round120 ftYour price list$1,380
Return duct, 14x1050 ftYour price list$1,200
Exhaust duct, 6" round15 ftYour price list$120
Fittings and hangers, from the runs38 EAWorked out from the runs$1,164
Supply diffuser SD-1, 24x249 EATyped on a past bid$378
Return grille RG-1, 24x122 EAYour price list$76
VAV box, 8" inlet2 EAClose match. Check it$1,960
Exhaust fan, 150 CFM2 EAYour price list$620
Crane pick and curb adapter1 LOTTyped on a past bid$1,650
Test and balance1 LOTSub's quote$1,200
Mechanical permit1 LOTAllowance$650
Install crew, 3 people120 HRYour crew's rates$4,680

Sample numbers. Not a real job.

A made-up sample bid, priced with the app’s own math. Not a real job.

Needs you

We tell you what we couldn’t read.

Every plan read ends with a short list: the questions that change the price come first, each with our best answer ready. Ask anything about the plans; answers cite the sheet.

  • Layers with no new or existing in their name, unsure scales, scans
  • One tap to accept our suggestion, or ask the GC
  • Answers stick across addenda, and for the same engineer’s next set

Prices, crew, confidence

Every number has a source.

Each line says where its price came from: your supplier list, a past bid, or a close match to check. Crew hours start from your own rates, and the confidence score says what to look at.

  • Fittings, hangers, and sheet metal worked out from the runs
  • Swap a supplier on one line without redoing the takeoff
  • Prevailing wage and union jobs never get a guessed rate

Bidding to a GC

A bid form GCs can level.

Base bid, alternates as adds and deducts, unit prices, and the addenda you acknowledge, filled in from the plan set. The GC awards it, passes, or asks a question from the link.

  • Addenda acknowledged come from the addenda the bid read
  • Award, pass with a reason, or ask: it all lands in Debrief
  • Questions you can’t answer become RFIs, with what you priced

Selling to the owner

A proposal they sign, and a deposit that lands.

Your logo and name on a clean proposal link. Good, better, best options. They accept and sign, get a signed copy by email, and pay the deposit to your own Stripe account.

  • Bank transfer first, so a big deposit doesn’t cost a big fee
  • We tell you when it’s opened, and when it’s paid
  • You see Stripe’s fee and ours before you turn deposits on

Addenda and Excel

Addenda compared. The workbook ready.

When an addendum comes in, each sheet is compared part by part and line by line, and your drawn shapes stay. Download an estimator’s workbook with live formulas that add up to the bid.

  • What changed, with what it does to the price
  • A tab for each kind of work
  • Formulas, not pasted numbers

Debrief

Every bid makes the next one sharper.

Tell it how the job went in two taps. It remembers where you were off (crew hours, quantities, prices, scope) and has the fix ready on your next bid. You approve every change.

  • Two taps after you hear back. Won, lost, and why.
  • Real crew hours, not guesses, set your rates.
  • Lessons show their proof. “From 4 jobs,” not “trust us.”
Sample. A close-out says Sample clinic ran +26 hrs on crew hours. Debrief learns: Your crew runs 12% long on VAV boxes. Next bids start at 3.4 hours a box, not 3.0. On the next bid it adds 2.4 hours, $187, for 6 VAV boxes, and the owner approves it.
Sample

Watch the miss shrink.

Each dot is a closed job: how far the real cost landed from the bid. Each close-out pulls the next bid in.

17%

Job 1 miss

2%

Job 10 miss

Sample: how close ten closed jobs came to their bids. Job 1 was 17% over. By Job 10 the miss is 2%, inside the ±4% band.
Sample: how close ten closed jobs came to their bids. Job 1 was 17% over. By Job 10 the miss is 2%, inside the ±4% band.
Sample closed jobs: how far the real cost landed from the bid
JobMiss
Job 1+17%
Job 2−13%
Job 3+9%
Job 4−6.4%
Job 5+5.4%
Job 6−4.2%
Job 7+3.6%
Job 8−3%
Job 9+2.6%
Job 10−2%
Sample. Your numbers depend on your jobs.

Know why you lose.

Hear the winning number? Put it in. You'll see how far off you were, by kind of work and by GC.

Winning number $44,900You were $3,350 (7%) high.

Lost bids, by reasonSample

  • Price too high8 lost bids
  • Relationship4 lost bids
  • Scope was off2 lost bids

On the next bid

Lessons show up where they matter, with a reason.

Each one names the jobs behind it. Apply it, or leave it for now. Your Playbook keeps the score.

Sample. A suggestion on the next bid's Crew step, and the Playbook it comes from. You approve every change.

Built with contractors

The people who price the work still decide.

Estimation was shaped with contractors who bid plan sets every week. Their jobs are not on this page.

  • You approve it

    Every line, the crew, and the price wait for you.

  • Same math every time

    Overhead, contingency, and profit follow the rules you set.

  • Made-up sample

    Sample office and Sample City. No customer's drawings on this page.

Compare

How Estimation compares

Plain notes on the tools contractors ask us about: what each is strong at, and what Estimation does today. Their prices print only from their own page.

Every comparison

Price

Starts at $199 a month. Your first bid is free.

Starter covers 8 estimates a month for one person. Core covers 30 for up to 3 people. Setup is free. Your first bid on your own plans is free, with no card. Cancel anytime.

Starter

$199a month

For one estimator.

  • 8 estimates a month
  • One person
  • Plans in sharp 2D and 3D, with search
  • Catalogs, crew, and a proposal you send
  • Debrief and your Playbook
  • Setup is free
Start my free bid

Core

$499a month

For a shop that bids every week.

  • 30 estimates a month
  • Up to 3 people
  • Plans in sharp 2D and 3D, with search
  • Catalogs, crew, and a proposal you send
  • Debrief and your Playbook
  • Setup is free
Start Estimation

Already on BrightDoor? Both are 20% off and go on the same bill: $159.20 or $399.20 a month.

Questions

Straight answers.

Anything else, write to us. A person answers.

When can I start?

Today. Start with one free bid on your own plans, no card. Starter is $199 a month for 8 estimates, and Core is $499 for 30. If you already pay for BrightDoor, both are 20% off.

Do you send the bid without me?

No. You approve every line, the crew, and the price. The proposal goes out only when you send it.

Does it change my price by itself?

No. It suggests. You approve each lesson, and you can turn any lesson off.

What does it learn from?

How your bids go, the real hours and costs you enter when a job closes, and the fixes you make while reviewing.

Who sees my numbers?

Only your account. Your prices, bid amounts, competitors, and general contractors are never shown to anyone else, and the lessons in your Playbook come only from your own jobs. How BrightDoor reads plans and prices work gets more accurate for everyone from how all contractors use it, as our Terms and Privacy Policy explain.

Is the sample on this page a real job?

No. The sample is calculated with the same math the app uses: $47,650 bid, $10,502.57 profit, confidence 82. The drawings are of a made-up office suite we drew. No real plan set is shown.

Does the 3D view work on every plan set?

On sheets printed from CAD, which is most plan sets. Scanned sheets show as pictures and stay in 2D. Heights come from the ceiling heights written on the sheet; anything else is marked as assumed.

What happens when it can't read something?

It says so. Every plan read ends with a Needs you list: layers that don't say new or existing, scales that disagree, scans, tags with no schedule row. Each comes with our best answer, and nothing blocks your bid.

Does it work when I bid to a general contractor?

Yes. A bid to a GC reads like their bid form: base bid, alternates as adds and deducts, unit prices, and the addenda you acknowledge. The GC can award it, pass, or ask a question from the link. Deposits are for owner jobs.

Can I take a deposit?

On owner jobs, yes. Connect your own Stripe account and the client pays the deposit after they accept, by bank transfer or card. Stripe's fee and BrightDoor's 0.5% come out of the deposit, and you see both before you turn it on.

How is this different from AI takeoff tools?

Many AI takeoff tools stop at counts. Estimation reads each sheet's own lines and CAD layers, shows the plan in 2D and 3D, prices the job with your suppliers and crew, writes the proposal, and tells you plainly what it couldn't read. You approve every line. See how it compares, tool by tool, below.

Which trades can use it?

HVAC, plumbing, electrical, and general contractors. Price another trade? Write to help@brightdoor.ai and name the work you bid.

Should I upload the whole plan set or just my sheets?

The whole set: every sheet, in one PDF or several, plus specs and addenda if you have them. Estimation finds the sheets for your trade and sets the rest aside, so there's nothing to split. You can add more files later.

What if a PDF has a password?

If it opens without one, it reads as usual. If it needs a password to open, type it once and we use it only for that read, then delete it. Or ask the GC for an unlocked copy, which also keeps the drawing's layers.

Where do my drawings go?

They stay on your account. This page never shows a customer's plan set.

What if I already pay for BrightDoor?

You get 20% off either plan: Starter is $159.20 and Core is $399.20 a month. It goes on the same bill.

Can I try it on my own plans first?

Your first bid is free, on your own plans. We read one plan set, you review every count, and you send the proposal. No card. A plan starts your next bid.

Can I cancel?

Yes. Your catalogs and bids stay yours to export.

Estimation

Price the next plan set with the same math.

Start Estimation if you price plan sets. You approve every line before the bid goes out.